康比电子有限公司

诚信通第5年
咨询热线:0755-27876201
联系康比电子:电话: 0755-27876201手机: 137 2874 2863Q Q: 577541227立即咨询邮箱: kangbidz@163.com
首页新闻中心 GED Crystal经营理念与驱动力

GED Crystal经营理念与驱动力

来源:http://www.kangbidz.com 作者:lusc 2023年10月13
GED Crystal经营理念与驱动力通用电子设备制造从原材料石英棒到最终密封并经过全面测试的组件的晶体毛坯,用于我们的振荡器和分立晶体元件。
We .保持一份人造石英的库存,在许多情况下,其质量接近行业所能生产的最佳水平。我们控制所有制造过程,并确保支持这些过程的采购材料在不增加成本的情况下生产出具有额外质量和性能的成品。
S特别注意生产的开始阶段。对切割角度的严格控制、高级研磨化合物、对研磨板和晶体坯平面度的一致监控以及超过两倍最低军用要求的精确化学蚀刻,都确保了锁定的高质量性能石英晶振。这些控制通过进一步的加工和最终的环境测试提供了额外的动力。
A与晶体主表面电接触的L1电极通过使用特殊夹具在超纯、高真空镀膜机中的真空沉积来沉积。这允许晶体一侧和另一侧之间电极的高容量绝对配准。
P光蚀刻掩模和纯基底涂层材料,如铝、铬、金和银,加上使用蒸发和电子束的高真空设备,在晶体表面产生导电接触点。这使得晶体电场的电阻接近于零,能量俘获高,长期老化最小。晶体的最终频率调整完全在定制的高真空蒸发设备和我们最新的最先进的自动化设备中完成。

Crystal Product

Thru-Hole Crystals

Part Number

Description

Frequency Range

HC49/U

Industry standard AT-cut
Resistance welded
Low Cost

1.8 to 150MHz

UM-1, UM-4, UM-5

High Frequency Range
Resistance Weld
Surface Mount Version available

1.0 to 180MHz

HC49/US

Low Profile Crystal
Resistance Weld
Surface Mount Version available

3.5795 to 70MHz

Surface Mount Crystals

UM-1/S

High Frequency Range
Resistance Weld

1.0 to 180MHz

 HC49/UP

Low Profile Crystal
Resistance Weld
3.5795 to 70MHz
SMX570 5x7mm Surface Mount
Industry Standard Footprint
Tape and Reel available
AT Cut
8 to 80MHz
L几乎不需要或不希望进行最终调整,因为在此过程中过量使用额外数量的金属会降低石英晶体的整体性能并加剧寄生响应。
W我们有GED的完全密封能力,可以用三种不同的方式包装我们的晶体,包括冷焊和电阻凸焊。我们每天可以密封多达4000个DIP振荡器、HC-45、标准HC-49支架、特殊HC49/US支架、所有军用晶体封装(包括TO-5和TO-8)和表面贴装封装,所有这些封装都在纯净、干燥的氮气环境中焊接。
我们的石英晶体和振荡器都是100%测试任何泄漏。GED Crystal经营理念与驱动力.
W广泛使用各种类型的电子测试设备进行过程测试和最终测试。军用、高可靠性和商用晶体在军用CI测量仪和计算机化环境测试系统上进行测试,该系统可以通过编程测量和记录频率、活动和杂散响应,范围从低至零下55°C到高达125°C。
All GED的产品通过激光或雕刻永久标记。我们所有的石英晶体谐振器和振荡器都100%保证达到或超过客户的规格。
General Electronic Devices manufactures crystal blanks from raw material quartz bars to final-sealed and fully tested components for use in our oscillators and discrete crystal elements.
We maintain an inventory of cultured quartz the quality of which, in many cases, approaches the best the industry can produce. We control all manufacturing process and assure that purchased material supporting those processes produced a finished product with extra quality and performance at no additional cost.
Special attention is given to the beginning stages of production. Tight control of the angle of cut, high grade lapping compounds, consistent monitoring of flatness of both lapping plates and crystal blanks and precise chemical etching at times exceeding two times the minimum military requirements all assure a locked-in, high quality performance crystal. These controls give that extra kick through further processing and final environmental testing.
All electrodes making electrical contact with the major surfaces of the crystal are deposited by vacuum deposition in ultra pure, high vacuum coating machines using special fixtures. This allows high volume with absolute registration of electrodes between one side of the crystal and the other.
Photo-etched masking and pure base coating materials such as Aluminum, Chrome, Gold and Silver – plus high vacuum equipment using evaporation and E-beam produce electrically conductive contact points to the crystal surface. These gives near zero resistance and high energy trapping of the crystal’s electric field with minimum long-term aging. Final frequency adjustment of the crystal is done exclusively in custom-made, high vacuum evaporation equipment and our new state-of-the-art automated equipment.
Little final adjustment is required or desirable because additional amounts of metal used in excess in this process will degrade the overall performance of the crystal and aggravate spurious responses.
We have total sealing capability at GED and can package our crystals in any of three different styles including cold weld and resistance projection welding. We can seal as many as 4,000 units a day from the DIP oscillator, HC-45, standard HC-49 holder, special HC49/US holder, all military crystal packages including TO-5 and TO-8 and surface mount packages – all welded in pure, dry nitrogen atmosphere.
Our quartz crystals and oscillators are all 100% tested for any leaking.
We make extensive use of various types of electronic test equipment for in-process and final testing. Military, High-Rel and commercial type crystals are tested on military CI meters, as well as on computerized environmental test system that can be programmed to measure and record frequency, activity and spurious responses from as low as minus 55°C to as high as 125°C.
All GED's product are marked permanently by laser or by engraving. All our crystals and oscillators are backed by a 100% guarantee to meet or exceed – the specifications of our customers.
PLL源
LMPL是一个高性能频率源系列,采用GED的专有VCO和锁相技术。这LMPL系列提供低相位噪声高准确度。它非常适合无线应用、本地振荡器和实验室参考。该模块包括一个输出放大器,可将许多应用的输出提升至+13 dBm。输出范围为100 MHz至6 GHz,可采用内部或外部基准电压源,或两者兼有。RF主输出和参考输出可通过SMA连接器获得。这些模块还提供视觉检测和锁定信号状态。这LMPL_F是2.0英寸x 2.0英寸x 0.75英寸的金属外壳,而LMPL_GFLMPL普惠制封装在3.0英寸x 3.0英寸x 1.0英寸的金属外壳中。

GED总部位于南加州,是一家为全球客户提供服务的国际公司。GED晶振提供了无与伦比的高质量、低成本和卓越服务的结合。超越客户的期望是GED经营理念背后的驱动力。我们可以根据任何交货时间表提供任何数量的标准和定制设计产品。

正在载入评论数据...

发表评论:

姓名:
邮箱:
正文:

欢迎参与讨论,请在这里发表您的看法、交流您的观点。

此文关键字: 石英晶振
诚征下列地区 晶振 | 石英晶振 | 圆柱晶振 | 贴片晶振 | 陶瓷晶振 | 石英晶体谐振器 | 频率元件 的合作伙伴:
深圳市 广州市 北京 上海 东莞 佛山 中山 顺德 珠海 杭州 温州 武汉 长沙 南京 大连 长春 西安 郑州 澳门 沈阳 南宁 昆明 济南 重庆 成都
有源晶振,石英振动子,声表面谐振器,石英晶振,32.768K表晶,进口晶振,石英晶体谐振器,温补晶振,圆柱晶振,陶瓷晶振,宽温晶振,手机晶振,贴片晶振,压电石英晶体,陶瓷雾化片,村田陶瓷谐振器,VCXO压控振荡器,TCXO晶振,压控温补振荡器,玩具晶振,爱普生晶振,精工晶振,KDS晶振,西铁城晶振,KDS晶振DSX321G晶振,20mm陶瓷雾化片,
kf

在线客服X

客服热线

0755-27876201